Salisbury, NC · lowrance Marine Electronics Installer
Lowrance Fish Finder & GPS Installation in Salisbury, NC
Carolina Vehicle & Marine Solutions installs the full Lowrance lineup in Salisbury, NC — HDS Pro, HDS Live, Active Imaging, Active Target, and Minn Kota integration. Every installation is wired by a team with 40+ years of marine electrical experience.
Lowrance Marine Electronics
Installed, Networked, and Water-Tested.
⚡40+ Years Marine Wiring Experience
We've seen what a bad installation looks like
🔗 Minn Kota i-Pilot Link Specialists
Full Lowrance and trolling motor integration
✅ Water-Tested Before Delivery
Every installation, every time
Lowrance HDS units are some of the most capable fish finders and GPS chartplotters on the market, but their full potential only comes through with a proper installation. Transducer placement, power delivery, and Minn Kota network integration all have to be right for the system to perform the way it's designed to.
At CVMS, we install Lowrance electronics as part of a complete electrical build. Every unit is mounted, wired, networked, and tested on the water before your boat leaves our shop. Our team has 40+ years of marine wiring experience. We've seen what a bad installation looks like, and we don't do it that way.
We work on all boat types : bass boats, inshore boats, bay boats, center consoles, and pontoons across Salisbury, NC and the surrounding region.
WHAT WE DO
PRODUCTS WE INSTALL
Fish Finders & Chartplotters
- Lowrance HDS Pro series: 9, 12, and 16-inch
- Lowrance HDS Live seriesLowrance HOOK Reveal series: entry-level installs
- Lowrance Elite FS series
- Active Imaging 3 in 1 transducer installation
- Active Target 2 live sonar installation
Sonar, Navigation & Trolling Motor
- SideScan and DownScan
- Transducer mountingTransducer placement optimization by hull type
- Lowrance GPS chartplotter installation and calibration
- GPS antenna mounting and wiring
- Minn Kota i-Pilot Link integration with Lowrance units
- Trolling motor wiring: full electrical build
HOW IT WORKS
OUR INSTALLATION PROCESS
01
Consultation
We assess your boat and current setup, recommend the right Lowrance configuration, and advise on transducer placement before any drilling or wiring begins.
02
Wiring & Mounting
Units are mounted at the correct viewing angle. Transducers are placed for best imaging performance based on your hull type and fishing style.
03
Minn Kota Integration
If you run a Minn Kota trolling motor, we configure i-Pilot Link so your Lowrance display controls spot-lock, route following, and heading hold.
04
Water Test
Every installation is tested on the water. We confirm sonar returns, GPS accuracy, and network connectivity before the boat goes back to you.
WHY CVMNS
WHAT SET UP US APART
- 40+ years combined marine electrical and wiring experience
- Minn Kota i-Pilot Link integration specialists
- Water tested before delivery in every installation
- All boat types: bass boats, center consoles, pontoons, bay boats
- Serving Salisbury, NC and a 75-mile radius
FAQ
COMMON QUESTIONS
What's the difference between Lowrance HDS Pro and HDS Live?
The HDS Pro is Lowrance's current flagship. It runs faster, has a brighter display, and supports Active Target 2 live sonar natively. The HDS Live is the previous generation and still capable at a lower price point.
Can you integrate my Lowrance unit with my Minn Kota trolling motor?
Yes and this is one of our most common Lowrance jobs. Minn Kota i-Pilot Link connects your trolling motor to your Lowrance display so you can control spot-lock, route following, and heading hold directly from the helm.
What is Active Target and do I need a professional to install it?
Active Target 2 is Lowrance's live forward-looking and down-looking sonar, similar to Garmin LiveScope. Transducer placement is critical to image quality. Professional installation is strongly recommended.
Do you install Lowrance on saltwater boats?
Yes. Saltwater installations require additional attention to corrosion protection on connectors and transducer hardware — our team accounts for this on every saltwater build.
How long does a Lowrance installation take?
A single HDS unit with transducer typically takes one day. A full build with multiple units, Active Target, and Minn Kota integration can take 2–3 days.
GET A QUOTE
REQUEST SERVICE
Tell us about your boat and what you're looking to install. We'll get back to you within 24 hours with a full quote.
A member of our team will call you directly.
DIRECT CONTACT
troy@cvmsnc.com · 420 Montclair Dr, Salisbury NC
